Description
Main Features
Instructions:
1. Long press the red “*” button for 3~5 seconds to turn on/off the pen...
2. Adjust temperature by pressing “+” or “-” button. The temperature increase or decrease 9°F/5°C per press. After
setting, temperature will be saved.
3. Temperature on the LCD screen will stop flicker after reaching the setting temperature. At that time, the pen will be in
temperature constant state. And the “°F” (°C) marker will keep flickering .
4. After required temperature showing up in LCD screen, please wait for a little while for heating up pen’s tip. Then go
on with your DIY project, you’ll get best results.
5. Press temperature adjustment button “+” and “-” at same time after activated the pen, the degree showing on LCD
screen can be switched from celsius to fahrenheit or fahrenheit to celsius.
Warning & Attention:
1. It is a normal phenomenon that smoke comes out when you are using this product, especially for the first use, please do
not worry.
2. Tips(Points) are made of copper which transfer heat fast but flimsy after warmed up. Please DO NOT apply excessive
pressure when using.
3. Tips(Points) are likely oxidized to black. Using emery to clean it firstly, then turning on power for heating, putting
on tin immediately, you can clean the oxide.
4. Do Not touch metal parts of the pen’s tip, or you’ll get burnt.
5. Turn Off the power and cool the pen down before replacing its tip.
6. Keep soldering iron pen dry. Do Not use electric soldering iron with wet hand.
7. Turn off the power while resting or finishing work. Keep it beyond the reach of children.
8. Keep it away from children during operation it to prevent accidents.
1. Long press the red “*” button for 3~5 seconds to turn on/off the pen...
2. Adjust temperature by pressing “+” or “-” button. The temperature increase or decrease 9°F/5°C per press. After
setting, temperature will be saved.
3. Temperature on the LCD screen will stop flicker after reaching the setting temperature. At that time, the pen will be in
temperature constant state. And the “°F” (°C) marker will keep flickering .
4. After required temperature showing up in LCD screen, please wait for a little while for heating up pen’s tip. Then go
on with your DIY project, you’ll get best results.
5. Press temperature adjustment button “+” and “-” at same time after activated the pen, the degree showing on LCD
screen can be switched from celsius to fahrenheit or fahrenheit to celsius.
Warning & Attention:
1. It is a normal phenomenon that smoke comes out when you are using this product, especially for the first use, please do
not worry.
2. Tips(Points) are made of copper which transfer heat fast but flimsy after warmed up. Please DO NOT apply excessive
pressure when using.
3. Tips(Points) are likely oxidized to black. Using emery to clean it firstly, then turning on power for heating, putting
on tin immediately, you can clean the oxide.
4. Do Not touch metal parts of the pen’s tip, or you’ll get burnt.
5. Turn Off the power and cool the pen down before replacing its tip.
6. Keep soldering iron pen dry. Do Not use electric soldering iron with wet hand.
7. Turn off the power while resting or finishing work. Keep it beyond the reach of children.
8. Keep it away from children during operation it to prevent accidents.
0 Comments